• +(91)-8510077831/32/33, 8510077834, 9811209769

Aero Mechanical Conveyor

The Applications of an Aero mechanical conveyer can be seen in most of the situations related to powder and granular material handling.
Of all the equipments designed for this work the Aero mechanical conveyer is most efficient in terms of its dust free and clean handling properties.

Designed and custom build for the products to be conveyed.
The aero mechanical conveyer can be seen in every conceivable situations for the powder handling system.

Principle of Operations

The Aero mechanical conveyer is a tubular design in which a wire rope assembly with accurately spaced polyurethane discs move at high speed. At each end of the conveyer, the rope assembly runs in the specially designed sprockets. The drive assembly can be located in either the top or bottom positions of the conveyer, depending on length, or to suit requirements.
The action of the rope assembly travelling at high speed, sets up to an airstream running at the same velocity. As material is fed into the airstream, it is fluidized and conveyed to the outlet where it is centrifugally ejected. High capacities can be achieved with low energy requirement and minimum product degradation and separation.
One of the most significant features of the Aero mechanical conveying system is its ability to convey materials at any angle 0 to 90 degree without loss of capacity. The range of operating configurations is virtually limitless- enabling the widest choice of system layout options using standard components and available factory environment.


  • Operates at any angle without any loss of capacity.
  • Dust-Free sealed system for ultra fine powder.
  • Almost all powder or granule material can be conveyed- Ideal for food products and chemicals in powder or granular form.
  • Low power consumption.
  • Material Finishes- Epoxy painted or stainless steel.
  • Removable housing cover with optional interlock for easy cleaning.

Area of Applications:

  • Water
  • Plastic
  • Chemicals
  • Minerals
  • Ceramics
  • Rubber
  • Food
  • Pharmaceuticals.

Almost all materials can be conveyed –making the AMC the ideal medium for transferring products in the form of powders, Granules pellets, flakes or flocks.

Typical Throughputs:

The table shows estimated AMC conveying rates in tonnes per hour based on continuously metered feed. When feeding from a sack dump, the rate may reduce by 10% to 40% depending on the material flow characteristics.

Layout Options

Designed to meet the majority of applications, The different basic AMC configurations are shown here.